Instruction manual

32
Exhibit 7.0-1 Start up messages.
ATTO FibreBridge 2400
(c) 2002 - 2005 ATTO Technology, Incorporated.
Firmware version 1.00 release date May 24 2005, 13:29:19 Build A75Q
127 Megabytes of RAM Installed.
2 4.25 Gb/s Fibre Channel Interface Port(s).
2 Ultra320 SCSI Interface Port(s).
Bridge World Wide Name = 20 00 00 10 86 20 00 95
Bridge Serial Number = “FB2400100007”
Bridge Name = “ “
Internal Temperature = 30 C [0 - 70]
For help, type HELP.
Active Configuration = ATTO
Aug 19 2005 12:51:27 A79U Initialization Complete
STM41T0 RTC initialized
SCSI Interface 1 PCI Config Test Passed
SCSI Interface 1 Initialization Passed
SCSI Interface 2 PCI Config Test Passed
SCSI Interface 2 Initialization Passed
FC Interface 1 PCI Config Test Passed
FC Interface 1 Register Test Passed
FC Interface 1 Reset Test Passed
FC Interface 2 PCI Config Test Passed
FC Interface 2 Register Test Passed
FC Interface 2 Reset Test Passed
Initializing Port MP1............
FC Interface 1 Initialization Passed
FC Interface 2 Initialization Passed
Power-On Self-Test (POST) Completion Status: GOOD
Ready.