Instruction manual

26
7 In the Send File box, enter the current
FibreBridge
.ima file or click the browse button
to find it
8 Click
Send File
9 The FibreBridge should acknowledge receiving
the file and display a message not to interrupt
power for 90 seconds.
CAUTIONCAUTION
Do not interrupt the flash process. Do not
power down the host or the FibreBridge
until the display returns the Ready prompt.
Interrupting the flash process will make
your FibreBridge inoperable and you will
have to return it to ATTO Technology for
repair.
10 Once the download is complete, cycle power on
the FibreBridge to invoke the new firmware.