Instruction manual

15
ATTO Technology Inc. FibreBridge Installation and Operation Manual
3.0 Configuring the FibreBridge
To configure the ATTO FibreBridge through FibreBridge Services, use ATTO ExpressNAV (a browser-
based graphical user interface). Default values are appropriate for most configurations, but may be
modified.
ATTO FibreBridge Services includes the means
to display and modify various attributes of
FibreBridge operation, as well as to update
firmware. The best way to access FibreBridge
Services is to use ATTO ExpressNAV, a browser-
based graphical interface. Refer to AT TO
ExpressNAV interface on page 27.
Note
The recommended management tool for the
FibreBridge is the ATTO ExpressNAV
interface.
Other methods are also available depending on
your operating system, what you want to
accomplish, and the method you are using to
access FibreBridge Services. Refer to Interface
options on page 31.
To use ATTO ExpressNAV you must know the IP
address for the FibreBridge. Refer to Discover the
IP address on page 13.
After getting an IP address and entering ATTO
ExpressNAV, you must map devices so that the
FibreBridge can access the devices in your
network. Refer to Mapping devices on page 17.
Additionally, it is best practice to change the
default user name and password. Refer to
Optional changes to system configurations on
page 19.