Specifications

80
Update firmware
CAUTIONCAUTION
Do not interrupt the flash process. Do not
power down the host or the FibreBridge
until the display returns the Ready prompt.
Interrupting the flash process will make
your FibreBridge inoperable and you will
have to return it to ATTO Technology for
repair.
10 Once the download is complete, cycle power on
the FibreBridge to invoke the new firmware.
Update firmware on the FibreBridge 2400
CAUTIONCAUTION
Before beginning this procedure, ensure
that all I/O to the FibreBridge has stopped.
1 Connect to ExpressNAV (refer to Configuring
the Ethernet ports on page 13) and click on the
Firmware page.
2Click Browse and locate the firmware you
unzipped in the preliminary steps.
3Click Upload and wait until a success message
is displayed.
CAUTIONCAUTION
Do not interrupt the flash process. Do not
power down the host or the FibreBridge
until the display returns the Ready prompt.
Interrupting the flash process will make
your FibreBridge inoperable and you will
have to return it to ATTO Technology for
repair.
4Click the Restart link.
5Click on Restart.