Specifications

16
Installation: FibreBridge 2300R/D
Serial port
The RS-232 serial port provides support for
remote monitoring and management through a
command line interface or menu system.
LED indicators
The LED indicators can be viewed from both the
front and the back of the FibreBridge 2300R/D.
Power: indicates if power is available from the
supply.
FC Activity: LED blinks to show activity on the
Fibre Channel port (numbered 0). During very
high activity, the LEDs appear to be steadily lit.
2 Gigabit operation: a lit LED indicates the
FibreBridge is using 2 Gigabit.
SCSI 0 Activity, SCSI 1 Activity: each SCSI bus
has its own LED to show activity on that bus
(numbered 0 and 1).
Ready: should light after power has been applied
indicating the FibreBridge is ready to operate.
Exhibit 1.5-1 Physical characteristics
1
0
i
n
c
h
e
s
(
2
5
4
c
m
)
1
8
.
7
2
5
i
n
c
h
e
s
(
4
2
4
.
8
1
c
m
)
1.72 inches
(43.69 cm)
Air vents
Connector side
(see below for details)
Front
Connector side
SCSI Port 2
SCSI Port 1
2 GB operation
Fibre Channel Activity
Power
Ready
LEDs
SCSI Port 2
SCSI Port 1
2 GB operation
Fibre Channel Activity
Power
Ready
LEDs
SCSI Port 1
SCSI Port 2
Fibre Channel port
Ethernet port
RS-232 port
Air vent
Power receptacle