Setup guide

NOTE Make sure the folder to which the path points exists and is accessible from the Windows workstation where
Cleaner XL jobs will be encoded. Also make sure that this folder has write privileges and has enough space to
accommodate encoded jobs.
Example of use
CleanerDestinationPath C:\Cleaner\exported
LogDailyReports
The LogDailyReports keyword specifies the number of application log files that are kept. When the number
of application log files on the workstation exceeds this value, the oldest log is deleted to preserve space.
The LogDailyReports keyword uses the following syntax
LogDailyReports <number>
where <number> is the number of log files to be kept on the workstation. Set this value to 0 to keep all
application log files.
Example of use
LogDailyReports 10
NetworkPanelDisplay
The NetworkPanelDisplay keyword filters the list of framestores in the Network panel to show framestores
that are either available on the network and mounted, or available on the network but with undetermined
mount status.
The NetworkPanelDisplay keyword uses the following syntax
NetworkPanelDisplay <filter_setting>
where <filter_setting> is set to either ShowMounted or ShowAll.
To:Use:
Show only framestores verified as both mounted and available on the Wire network.
ShowMounted
Show all framestores available on the network without first checking whether they are
mounted. Using this option slightly reduces the time needed for your application to start be-
cause no further checks are performed on remote framestores.
ShowAll
Example of use
NetworkPanelDisplay ShowMounted
Project Configuration File Keywords
Framerate
The Framerate keyword sets the default frame rate for the project work session.
The Framerate keyword uses the following syntax
Framerate <frame_rate>
90 | Appendix B Configuration Files