Setup guide

NOTE You can obtain the latest version of the guides mentioned in this section by going to
www.autodesk.com/me-documentation.
■ If you do not wish to use the automatically-installed WiretapCentral or Wiretap Gateway on your local
workstation, you can install these components on dedicated systems in your facility network. For system
requirements and installation instructions, see the Autodesk WiretapCentral Installation Guide.
NOTE If you relocate WiretapCentral, update the value of the WiretapCentralUrl keyword in the
/usr/discreet/<product_home>/cfg/init.cfg file to point to the new location of WiretapCentral. See
WiretapCentralUrl on page 87.
■ If you intend to use Cleaner
®
XL to encode video over the network, install and configure the necessary
components. Refer to Using Cleaner XL with Autodesk Visual Effects and Finishing Applications.
■ If you intend to use the generic 3D lookup tables (LUTs) or the monitor calibration utility provided by
Lustre
®
Color Management, install the necessary components. Refer to the latest Lustre Color Management
User Guide.
■ To view system statistics and perform system tests from a user-friendly Web-based application, install
the free Autodesk SystemCentral
™
application on your workstation. See the Autodesk SystemCentral
Installation and User Guide for installation instructions.
Installing Additional Utilities | 55