Setup guide

cat /proc/driver/aja
If the PCI version line in the output lists a different version than the required one, perform the
following steps to upgrade the firmware.
NOTE Before upgrading the AJA firmware, make sure you have upgraded the DKU, and that you have
restarted the system.
2 Go to the /usr/discreet/DKU/current/Utils/AJA_firmwareUpdate directory.
3 Run the AJAfw_update utility to scan the AJA current firmware and, if required, update to the latest
firmware version. Type:
./AJAfw_update
If the utility detects that the firmware and drivers need to be updated, it prompts you to start the update.
4 Start the firmware update by typing Y and then pressing Enter.
While the AJA firmware and drivers are being updated, your workstation appears to be frozen and your
mouse and keyboard do not work. This is normal and indicates that the firmware is being updated.
Once the firmware update is complete, you are returned to the terminal.
5 Shut down your workstation by typing:
shutdown -g0
If your workstation does not prompt you to power down, press the power button for 10 seconds to
force a power down.
6 Disconnect the power cord.
7 Wait 10 seconds, reconnect the power cord, then restart your workstation.
NOTE For more details about the AJA firmware procedures, consult the README file located in the current
directory.
Upgrading the AJA OEM-2K Firmware | 31