Setup guide

While Autodesk Media and Entertainment makes no certification statement about any tape drive device,
you can use the “Tape Drive Test” plug-in in Autodesk SystemCentral to test SCSI tape drives for compatibility.
For more information, see the Autodesk SystemCentral User Guide.
Configure BIOS
Z820
If BIOS settings are not set up correctly before installing Linux, you will need to reinstall the OS.
Before configuring the custom Autodesk BIOS settings, it is recommended to reset all BIOS settings to factory
defaults.
To enter the BIOS menu, press F10 while booting.
Certified BIOS settings. Items not listed are left at their factory values.
ValueItemSubmenuBIOS Menu
RAID+AHCISATA EmulationStorage OptionsStorage
Disable (press F5)EFI Boot sourcesBoot Order
ATAPI CD/DVD DriveBoot Order > Legacy Boot sources
USB Floppy / CD
<hard drive model>Hard Drive
DisableRuntime Power ManagementOS Power ManagementPower
NormalIdle Power Saving
DisableTurbo Mode
DisableSATA Power ManagementHardware Power Management
DisableNumaBus OptionsAdvanced
DisableInternal SpeakerDevice Options
DisableNIC Option ROM Download
DisableNIC1 Option ROM Download
EnableHyper-threading
DisableSlot 5 Option ROM DownloadSlot Settings
Configure BIOS | 23