Setup guide

9 Scroll through the init.cfg file, verify the keywords, and modify their
values as necessary. It is recommended to verify at least the following
keywords to make sure they reflect your hardware configuration.
SettingKeyword
The video card used by your workstation. It can take the following values:
AJA_KONA3G
Video
AJA_OEM2K
See Video (page 129) for details about the keyword.
The DVIRamp keyword is applicable only if your workstation is equipped with
a Miranda DVI-Ramp.
DVIRamp
See DviRamp (page 130) for details about the keyword.
The VideoPreviewDevice keyword is applicable only if your workstation is
equipped with a Miranda DVI-Ramp or an NVIDIA
®
SDI card.
VideoPreviewDevice
You can use the VideoPreviewDevice keyword to enable alternate SD or HD
broadcast monitors.
See VideoPreviewDevice (page 131) for details about the keyword.
wacom
®
See TabletDriver (page 133) for details about the keyword.
TabletDriver
Enable the VTR keywords that have settings corresponding to the VTRs you
intend to use.
VTR
See Vtr (page 134) for details about the keyword.
AJAAudiodevice
See Audiodevice (page 138) for details about the keyword.
10 To modify the init.cfg file, do one of the following:
■ If the file opened in a text editor, edit the values as needed, then save
and exit the init.cfg file.
■ If you are in xxdiff, each difference between the old and the new
init.cfg files is highlighted. Click the correct value for each keyword,
regardless of whether it is in the left or right panel. Make sure you
select a value for each highlighted difference. Then open the File
menu and choose Save as Right. After the file is saved, close xxdiff.
Installing Flame Premium or Visual Effects and Finishing Standalone Software | 55