Setup guide

9 Connect the SDI IN 1/A, SDI IN 2/B, SDI OUT 1/A and SDI OUT
2/B plugs of the AJA cable to the SDI1, SDI2, SDI3 and SDI4 ports of
the AJA Kona 3G card.
10 Connect the SDI IN 1/A, SDI IN 2/B, SDI OUT 1/A and SDI OUT
2/B plugs on the other end of the AJA cable to the SDI1, SDI2, SDI3
and SDI4 ports on the back of the AJA K3G-Box, as illustrated.
11 Connect the AJA control cable to the AJA Kona card and to the
corresponding port on the back of the AJA K3G-Box.
Connecting Audio Components
Overview of Audio Components
Your application uses the Discreet Native Audio subsystem. Discreet Native
Audio uses the following hardware components, shipped with your system.
Converts signals between the workstation and all
digital or analog audio I/O devices.
Lucid ADA 88192
Audio Converter
The Balanced Audio breakout box is the audio
component of the AJA breakout box. It provides
AJA K3G-Box
Balanced Audio
connections for audio I/O. This breakout boxbreakout box and
connects to the AJA Kona 3G adapter on yourAJA Kona 3G adapter
card workstation. The Kona 3G adapter provides
real-time input and output of uncompressed SD
and HD video signals as well as audio data at 24-bit
resolution. The Kona 3G adapter handles balanced
AES/EBU audio signals from the Balanced Audio
breakout box.
Wiring Audio Components
The following diagram illustrates how to connect the Discreet Native Audio
hardware components to the AJA breakout box.
Setting Up Your Workstation Hardware | 17