Setup guide

FunctionDefaultData typeParameter
tem & Menu Settings” in the “Pro-
ject Management” chapter of the
Autodesk Lustre User Guide).
The ID numbers for the Function,
Navigation, and Grading panels of
function=”0”
grading=”0”
<PanelIDs>
the ACS. You must manually config-
ure these keywords.
If your control surface is a Tangent
CP100, Lustre does not use these
keywords.
navigation=”0”
function=”101”
grading=”100”
<PanelIPTags>
navigation=”102”
<Browsed>
All computers on the BrowseD net-
work must use the same port to
communicate.
NOTE For Linux over IP, set the
port value to 1044.
1055Integer<Port>
Administrative user on the BrowseD
server.
rootString<Username>
Password for the administrative
user.
NOTE To encrypt the password,
set the attribute toEncrypt to yes.
The next time the application
starts, the password string is encryp-
ted in the configuration file.
xxxString<Password>
170 | Chapter 6 Advanced Configuration and Troubleshooting