Setup guide

Hires
The Hires keyword sets the refresh rate of the graphics monitor. Note the
following when setting the refresh rate:
■ The rate is measured in Hertz (Hz).
■ When using the video card in conjunction with an external sync source,
the refresh rate should match the framerate.
■ If you are using a non-integer framerate (for example, 29.97), set the refresh
rate to the nearest integer (in the previous example, 30).
The Hires keyword uses the following syntax
Hires [Custom,]<refresh_rate>
Is:Where:
An optional parameter that overrides the application's refresh rate. For example,
you may choose to override the 60-Hz refresh rate for an NTSC project by
using the Custom option with a value of 30Hz.
Custom
The refresh rate of the graphics monitor. Append Hz for free-running config-
urations, Hzf for configurations that are fixed to an external sync source.
<refresh_rate>
Examples of use
Keyword ExampleProject Resolution
Hires 60HzNTSC
Hires 50HzPAL
Hires 30HzfNTSC (external sync source)
Hires 25HzfPAL (external sync source)
Hires 48HzFilm
Hires 60Hz
24p Multi-Master Editing
™
Visual Effects and Finishing Configuration Files | 157