Setup guide

The ArchiveLibrary keyword uses the following syntax
ArchiveLibrary <directory_path>
where <directory_path> is the path to which online HTML and ASCII tables
of contents are saved.
Example of use
ArchiveLibrary /usr/discreet/archive
SetupArchiveTape
The SetupArchiveTape keyword identifies the device to which setup
information for an archived project is saved. A project's setups are saved as a
.tar format archive, creating a single file that can be extracted, preserving the
original directory structure.
The SetupArchiveTape keyword uses the following syntax
SetupArchiveTape <device_type>
where <device_type> is the path to the device where you want to save the
setup archive. You can set the path to point to a tape device or use a file
destination as a virtual device. If you set a file destination, you must add a
filename ending with the .tar extension that you want to use for the setup
archive.
Example of use
SetupArchiveTape /var/tmp/setups.tar
Environment Directory Pathnames
The three keywords in the Environment Directory Pathnames section specify
the paths to directories for resources shared by all projects. These directory
paths should not be modified.
Menu
The Menu keyword specifies where application menu files are stored.
Visual Effects and Finishing Configuration Files | 143