Setup guide

TabletDriver
The TabletDriver keyword identifies the tablet driver. Only Wacom
®
Intuos-series USB tablets are currently supported.
The TabletDriver keyword uses the following syntax
TabletDriver wacom
MidiDevice
The MidiDevice keyword identifies MIDI devices that are used with Autodesk
Visual Effects and Finishing systems. Only one device is recognized at a time.
The MidiDevice keyword uses the following syntax
MidiDevice <name>, <device_configuration_file>, <serial_port>,
<protocol>, <baud_rate>, <parity>[, <stopbit>]
Is:Where:
The name by which you want to identify the MIDI device in the ap-
plication.
<name>
The name and path of the device configuration file for the MIDI
device. The path is optional.
<device_configura-
tion_file>
The serial port to which the MIDI device is connected.<serial_port>
The protocol used to communicate with the MIDI device. It can be
either direct_RS422 or direct_RS232.
<protocol>
The baud rate used to communicate with the MIDI device.<baud_rate>
The parity setting to communicate with the MIDI device. It can be
set to EVEN, ODD, or NOPARITY.
<parity>
The size of the stop bit (optional).<stopbit>
Visual Effects and Finishing Configuration Files | 133