Setup guide

Correspond to the following HD format:Project configuration tem-
plates with the following
string in their name:
1920x1080 progressive segmented frames at 25 frames per second
(1080/25psf, SMPTE-274M, RP-211)
1920x1080@25000psf
1920x1080 interlaced scan at 50 fields per second (1080/50i, SMPTE-
274M)
1920x1080@50i
1920x1080 interlaced scan at 59.94 fields per second (1080/59.94i,
SMPTE-274M)
1920x1080@5994i
1920x1080 interlaced scan at 60 fields per second (1080/60i, SMPTE-
274M)
1920x1080@6000i
Modifying Project Configuration Files
Project configuration files have open read/write permissions and anyone can
modify them. In some cases, you may want to restrict access to them using
the chmod command.
Here are some basic guidelines for modifying project configuration files:
■ Do not modify the template project configuration files. These are used by
the software to generate new project configuration files and should not
be altered. Create a copy of the desired project .cfg file, and modify that
in a text editor as needed.
■ Create a backup of the project configuration file before making any changes
to it.
■ Modified project configuration files must end with _custom.cfg.
■ You cannot use multiple project configuration files with a single project.
A project configuration file must have the same name as its corresponding
project and it must be located in the project's cfg directory.
126 | Chapter 6 Advanced Configuration and Troubleshooting