Setup guide

SERVER host03 DLHOST01=886C2B75E8E57E4B03D784C3A2100AC2
27005
VENDOR discreet_l
USE_SERVER
INCREMENT flameEDU_x86_64_b_2011_1 2011.99 02-oct-2010
\
6 Save and close the file.
This file sets up the floating licenses available for distribution by the
license server to the Creative Finishing workstations on your network.
Changing the Default Port Used by the License
Server
To avoid conflicts with other applications or license servers in your facility,
you may need to change the default port setting used by the license server,
or license servers in the case of a redundant configuration. This requires a
minor change to the DL_license.dat file on your license server(s), as well as on
every Creative Finishing Softwareworkstation on the network.
To change the default port used by a license server:
1 Log in as root to the system where the license server is installed.
2 Open the /usr/discreet/licserv/licenses/DL_license.dat file in a text editor.
3 Find the SERVER line.
By default, no port number is specified at the end of the SERVER line for
a single license server and the license server uses default port number in
the range of 27000-27009. By default, redundant license servers are set
to port 27005.
Single license server example:
SERVER server DLHOST01=886C2B75E8E57E4B03D784C3A2100AC0
Redundant license servers example:
SERVER host01 DLHOST01=886C2B75E8E57E4B03D784C3A2100AC0
27005
SERVER host02 DLHOST01=886C2B75E8E57E4B03D784C3A2100AC1
27005
SERVER host03 DLHOST01=886C2B75E8E57E4B03D784C3A2100AC2
27005
Network Licensing | 113