Setup guide

NOTE If you are working with StandardFS DPX or Cineon footage coming from
the local Wiretap Server, you must mount your storage on the render nodes.
Refer to:Step:
Starting and Stopping the BrowseD
Service (page 94).
1. Start the BrowseD server.
Configuring Workstations to Use the
BrowseD Server (page 95).
2. On all machines (like the Lustre Master Station, the Slave
Renderer, and background render nodes), configure the
init.config file to connect to the BrowseD server.
Making BrowseD Directories Accessible
from the CEV_ProdName_CEV Browser
(page 96).
3. Make the remote storage accessible from the file browser on
the Lustre workstations.
Using BrowseD for Rendering with
Burn for Lustre (page 97).
4. Configure background rendering to use the BrowseD server.
Using BrowseD with the Slave Render-
er (page 97).
5. Configure the Slave Renderer to use the BrowseD server.
Starting and Stopping the BrowseD Service
The BrowseD service starts automatically after you install it. You can manually
start the service using the command line interface. The service starts
automatically whenever the computer running BrowseD restarts.
To start or stop BrowseD:
1 In a terminal, type one of the following.
DescriptionCommand
Stops BrowseD./etc/init.d/browsed_<version>stop
Starts BrowseD./etc/init.d/browsed_<version>start
94 | Chapter 4 Configuring Your Software