Setup guide

6 Click Install.
7 Start the license server (page 61).
The license wizard creates the following license files:
■ Workstation license: /usr/local/flexlm/licenses/DL_licenseNetwork.dat
■ For a local license server, it creates the license server license:
/usr/discreet/licserv/licenses/DL_license.dat.
■ For a remote license server, you must create the license file for the license server manually. See Create a
license file for a remote license server (page 59).
Create a license file for a remote license server
After you receive your license codes, edit the /usr/discreet/licserv/licenses/DL_license.dat license file
on the license server (or all three servers, if you are configuring redundant license servers), and enter the
license codes you received from Autodesk.
The license information contains keywords that identify the license server, as well as the license strings for
products or features.
DescriptionKeyword
Specifies the hostname of the license server from which to obtain the license, followed by its
dlhostid.
SERVER
In Burn, specifies the daemon that is serving the license.VENDOR
In Flare, specifies the daemon that is serving the license.DAEMON
Indicates whether the system should obtain its license from a license server.USE_SERVER
License strings for the software and feature entitlements.FEATURE
To create the license server file on a license server:
1 Log in as root to the license server.
2 Navigate to the licenses directory by typing: cd /usr/discreet/licserv/licenses
3 If the file DL_license.dat does not exist in the directory, create it: touch DL_license.dat
4 Open the file DL_license.dat in a text editor.
5 Enter the information provided by Autodesk in this file. If you are setting up redundant a network
license, there are three SERVER strings. It should be similar to the following snippet
■ For Burn:
SERVER server DLHOST01=886C2B75E8E57E4B03D784C3A2100AC0
VENDOR discreet_l
USE_SERVER
FEATURE flameEDU_x86_64_b_2011_1 2011.99 02-oct-2010 \
■ For Flare:
Start the software | 59