Setup guide

3 Disable any settings that might cause proxies to be generated or the clip to be resized by editing the
project's settings in the Preferences Menu, Project Management group.
4 Open the clip library and enable the following:
■ Dual Library View
■ Show All Libraries
■ Copy on Drag
5 In the Clip Library menu, click Network. The local system is listed at the top of the network library.
Remote systems are listed below it, in alphabetical order.
6 Select a library on a remote system and exit the network library. Selected libraries are highlighted and
marked with a “C” (connect) or “AC” (auto-connect).
7 Return to the clip library, navigate to the remote library in one view, and the local library in the other.
8 In the clip library Wire Options area, enable Background Wire.
9 Drag and drop a clip from the remote library to your local library.
10 Visually verify the selected clip is successfully copied. Additional verification is also possible:
■ View progress of the background I/O in the Background Import/Export Queue. In the Library menu,
click the Background Monitor button (Ctrl+0).
■ Review messages appearing in the message bar in the Message History window. In the Preferences
menu, Miscellaneous group, click the Message History button (Ctrl+Alt+F7).
Configure Backburner services
Backburner Server and Backburner Manager are installed with the Creative Finishing application, and are
set to run automatically when the workstation starts. By default, the Backburner Server installed on the
workstation communicates with the locally-installed Backburner Manager.
To configure Backburner services:
1 Ensure Backburner Server is set to run automatically on your workstation: chkconfig –-list | grep
-i backburner_server. If backburner_server is not set to “on” for run levels 3, 4, and 5, enable it:
1 chkconfig backburner_server on
2 /etc/init.d/backburner_server restart
2 Decide if you want to use the locally installed Backburner Manager, or a centralized Manager installed
on another system in your network. See Deploying on networked hardware (page 81).
3 Make sure the following Backburner keywords in the /usr/discreet/<product_home>/cfg/init.cfg
file are configured properly.
SettingKeyword
Set <hostname> to the hostname or IP address of the workstation running
Backburner Manager. This hostname or IP address must match the one in
BackburnerManagerHostname <host-
name>
the /usr/discreet/backburner/cfg/manager.host file. If it does
not, background Wire transfers will fail.
Set <priority> to a value from 0 to 100. The default is 50.BackburnerManagerPriority <prior-
ity>
36 | Chapter 1 Flame Premium Installation and Configuration