Setup guide

In a configuration with two XR RAID enclosures, the number of XE extension enclosures per XR RAID
enclosure must be the same. The total number of enclosures in the storage assembly must be an even number.
Archiving to USB 2.0, FireWire (IEEE 1394) and fibre channel devices is supported. This includes filesystems,
tape drives, and VTRs. For information on connecting a VTR, see Video (page 6).
Configure BIOS
Z820
If BIOS settings are not set up correctly before installing Linux, you will need to reinstall the OS.
Before configuring the custom Autodesk BIOS settings, it is recommended to reset all BIOS settings to factory
defaults.
To enter the BIOS menu, press F10 while booting.
Certified BIOS settings. Items not listed are left at their factory values.
ValueItemSubmenuBIOS Menu
RAID+AHCISATA EmulationStorage OptionsStorage
Disable (press F5)EFI Boot sourcesBoot Order
ATAPI CD/DVD DriveBoot Order > Legacy Boot sources
Hardware setup | 17