Setup guide

3 Carefully add the code to the license file /usr/local/flexlm/licenses/DL_license.dat.
4 Save the license file and restart Wiretap Gateway with /etc/init.d/wiretapgateway restart.
Installing and and Licensing the Wiretap Gateway Software Included with Smoke for Mac OS X
Install and license the Wiretap Gateway included with Smoke for Mac OS X. This version is for Smoke for
Mac only. Install, configure and license Smoke for Mac OS X before you install and license the Wiretap
Gateway.
1 You should register and set up the network license server for Smoke for Mac OS X before you install
Wiretap Gateway.
2 On the Smoke installation media run Install Wiretap Gateway Server from the Standalone Installers
folder.
3 Click through to the Network License Configuration dialog and enter the license server hostname in
the Server hostname field.
4 Depending on your OS configuration, the Select a Destination window may appear. Click “Install for
all users of this computer”, then click Continue.
5 Click Install to begin the installation process.
To change the license server after you install the Smoke for Mac edition of Wiretap Gateway:
1 Open the License Server Selector:
■ If Smoke is installed on the same workstation: /Applications/ Smoke [product version]/Utilities
■ If Smoke is not installed on the workstation: /Applications/Autodesk/Adlm
2 Enter the name of the license server in the Hostname field and click OK.
Configure Wiretap Gateway
After changing the configuration file /usr/discreet/wiretapgateway/cfg/wiretapgateway.cfg you must
restart Wiretap Gateway:
■ On OS X, use Applications/Autodesk/Smoke Common Utilties/Service Monitor
■ On Linux, do sudo /etc/init.d/wiretapgateway restart
Define an additional IP address
By default, the primary network interface of Wiretap Gateway is the GigE network adapter. If you are using
an additional network, such as an InfiniBand network, uncomment the IP0 parameter, and set its value to
the InfiniBand IP address of the host. For example: IP0=10.10.11.10
To define more network interfaces, use the IP1, IP2, parameters and so on.
Filtering the file system
You can hide directories and file types from Wiretap Gateway with the ExcludeDirs, ExcludeExts, and
LimitDirs parameters. The first two exclude a comma-delimited list of objects. LimitDirs excludes everything
on the filesystem except a comma-delimited list of objects. LimitDirs overrides ExcludeDirs in the event
of a conflict. Examples:
■ ExcludeDirs=/dev,/lib,/usr/lib,/bin,/usr/bin,/sbin
■ ExcludeExts=jpg,tiff,mov
136 | Chapter 3 Networked processing