Setup guide

HP xw8600 Workstation
HD-SDI In (A) from 4:2:2 VTR (or 4:4:4 dual link)
HD-SDI In (B) from 4:4:4 VTR (dual link 0:2:2)
HD-SDI Out (A) to 4:2:2 VTR (or 4:4:4 dual link)
HD-SDI Out (B) to 4:4:4 VTR (dual link 0:2:2)
Ref in from sync gen
HD-SDI (V2) Out 0:2:2/4:4:4
display device on VTR
HD-SDI (V1) Out 4:2:2 or 4:4:4
display device on VTR
To keyboard, mouse,
Monitor calibrator (#)
USB Tablet (*)
To Slave Renderer (#)
To house network (*)
NVIDIA Quadro FX SDI
Connect to second DVI out
on the main FX 5600 card
NVIDIA Quadro FX 5600
To graphics monitor
ATTO 44ES FC
Storage 1,4 to SAN; 2,3 to Stone
To Wire network QUAD GigE
(InfiniBand switch option available)
ATTO 44ES FC opt storage (*)/
QUAD GigE - 0 to Control Surface,
1 to LAN, 3 to SAN (#)
AJA OEM-2K
DVI2 Out to FX5600 SDI
daughter card
Product key:
* Visual Effects and Finishing
# Lustre
Connecting the Monitor
To connect the monitor:
➤ Use the DVI cable to connect the DVI OUT1 port of the NVIDIA
®
Quadro
®
FX 5600 graphics card to
the DVI-D IN port of the monitor.
You can use the DVI extender cable (DL.CAB-HDTV-FO82MM) to extend the cable to a machine room.
NOTE Although the DVI fiber cable connectors are identical, their functions are different. Ensure that the connector
labeled Send is connected to the workstation, and that the connector labeled Receive is connected to the monitor.
Connecting the Keyboard, Mouse, and Tablet
Connect the keyboard, mouse, and tablet to the USB extender and the workstation before booting the
workstation and before installing the application.
14 | Chapter 3 Connecting Peripherals