Specifications

34
Serverless backup
To enable serverless backup on the
FibreBridge:
1 Access the FibreBridge either through RS-
232 or Ethernet.
2 After the
Ready
prompt, type
set Fcinitiator
enabled
.
3 At the next
Ready
prompt, type
saveconfiguration restart
.
4 The FibreBridge is now ready to perform
serverless backup.
Exhibit 9-1 Once the server sends a command to the FibreBridge for extended copy, the FibreBridge manages
the backup procedure, by-passing the server.
Host
Serverless Backup Application
Server
Serverless Backup Agent
Fibre Channel SAN
ATTO FibreBridge
Data Mover
Disk Array
Server storage
Data path
SCSI tape
SCSI tape backup device
Data path
Control path
Control path
Serverless backup in a SAN