Specifications

15
ATTO Technology FibreBridge 1180E/D Installation and Operation Manual
8.1.1 General information commands
The CLI commands outlined in this chapter get information which are used in a variety of situations with
the FibreBridge.
FibreBridgeModel
Reports model information about a specific FibreBridge
Action:
none
Information:
get FibreBridgeModel
Returns:
FibreBridge 1180
8
2001 ATTO Technology, Incorporated
Firmware version mm..mm release date mm.dd.yyyy, hh:mm:ss
Build zzzz
FibreBridgeName
Specifies the eight-character name assigned to the FibreBridge used to identify individual FibreBridge units. It is not the World Wide Name (WWN).
Actions:
set FibreBridge Name [value]
Information:
get FibreBridgeName
SaveConfiguration
Help
Displays a list of available commands. If command name is specified, displays detailed command-specific information.
Action:
none
Information:
Help [command name]
Info
Displays version numbers and other production information for key components within the FibreBridge
Action:
none
Information:
Info
Return:
Device = “FibreBridge 1180”
Serial Number = PPPnnnnnn
Device Version = xxxx
Device Build = xxxx
Build Date = Month Day Year ‘Build Time’
NVRAM Revision = xx
CLI Revision = x.xx
FC Firmware Revision = x.xx.xx
FibreBridge name = xxxxxxxxxx
World Wide Name 0 = xx xx xx
SCSI Port 0 = “[SE | HVD | LVD | UNKNOWN ]”
SerialNumber
Reports the FibreBridge serial number which is unique for each FibreBridge. The serial number tracks the board throughout its life and should not
be changed for any reason.
Actions:
none
Information:
get SerialNumber
Verbose return:
Part Identifier: PPPPPPP Sequence Number: nnnnnn
VerboseMode
Specifies the detail of feedback for the command line interface. Disabling this option removes parameter names from action commands and removes
descriptions from information commands.
Limits: enabled or disabled Default: enabled (returns have parameter information)
Actions:
set VerboseMode [enabled | disabled]
Information:
get VerboseMode