Product data

ATTO Technology, Inc. ATTO FibreBridge Software Manual
- -
55
ATTO Technology, Inc.
Buffer ID nvram offset Buffer Description (default values*)
23: 0x4E – 0x51 IP Subnet Mask (default 0xff 0xff 0xff 0x00)
This four-byte field indicates the subnet mask for FibreBridge Ethernet services. The
address is stored in dotted-decimal notation (e.g. 0xFF 0xFF 0xFF 0x00 represents the IP
address 255.255.255.0).
24 0x52 Ethernet Options (default 0x01)
Bits 7-5: Reserved
Bit 4: DHCP 1=DHCP Enabled 0=DHCP Disabled
Bit 3: Reserved
Bit 2: 100 Base-T Speed 1=100 Base-T Enabled 0=100 Base-T Disabled
Bit 1: 10 Base-T Speed 1=10Base-T Enabled 0=10 Base-T Disabled
Bit 0: Auto Speed Detect 1=Speed Detection Enabled 0=Speed Detection Disabled
25: 0x53 Temperature High Warning (default: 0x28)
A user definable SBYTE parameter that indicates when certain alarm flags should be set
within SCSI Enclosure Services with respect to excessive temperature. The default
Temperature High Warning is 40 degrees Celsius.
26: 0x54 Temperature Low Warning (default: 0x05)
A user definable SBYTE parameter that indicates when certain alarm flags should be set
within SCSI Enclosure Services with respect to excessive temperature. The default
Temperature Low Warning is 5 degrees Celsius.
27 0x55 Event Logging Flags (default 0x02)
Bits 7-2: Reserved
Bit 1: Event Status Flag 1 = Log all events 0 = Log events with status other than good
Bit 0: Enabled Flag 1 = Logging enabled 0 = Logging disabled
28 0x56 Event Logging Subsystem (default 0x3F)
Bit 7-6: Reserved
Bit 5: NVRAM & Flash 1 = Logging enabled 0 = Logging disabled
Bit 4: GBIC Connector 1 = Logging enabled 0 = Logging disabled
Bit 3: Reserved
Bit 2: Ethernet 1 = Logging enabled 0 = Logging disabled
Bit 1: SCSI Processor/i960 1 = Logging enabled 0 = Logging disabled
Bit 0: FCP Processor/i9601 = Logging enabled 0 = Logging disabled
29 0x57 Event Logging Level (default 0x3F)
Bit 7-6: Reserved
Bit 5: Debug, ATTO tracking events 1 = Logging enabled 0 = Logging disabled
Bit 4: Other, otherwise not categorized 1 = Logging enabled 0 = Logging disabled
Bit 3: Failure, hard failure 1 = Logging enabled 0 = Logging disabled
Bit 2: Critical, operation limited/curtailed 1 = Logging enabled 0 = Logging disabled
Bit 1: Warning, unexpected situation/condition 1 = Logging enabled 0 = Logging
disabled
Bit 0: Info, general information 1 = Logging enabled 0 = Logging disabled
2a 0x58 Event Displaying Flags (default 0x02)
Bits 7-2: Reserved
Bit 1: Event Status Flag 1 = Display all events 0 = Display events with status other
than good
Bit 0: Reserved