Product data

ATTO Technology, Inc. ATTO FibreBridge Software Manual
- -
7
ATTO Technology, Inc.
Specifies the translation rules applied to fibre channel LUNs in the Virtual Device Address Method
format.
FcConnMode (ATTO FibreBridge 2200R/D and 3200R)
Syntax: set FcConnMode [loop | ptp]
get FcConnMode
Returns:
(terse) [loop | ptp]
(verbose) FcConnMode = [loop | ptp]
Specifies the Fibre Channel port type to which the ATTO FibreBridge will attempt to login. Set
FcConnMode to ‘loop’ to enable FL_Port logins and FC_AL communications and addressing. Set
FcConnMode to ‘ptp’ to enable Point-to-Point connections (i.e. F_Port fabric connections).
FcClass2 (ATTO FibreBridge 2200R/D and 3200R)
Syntax: set FcClass2 [enabled | disabled]
get FcClass2
Returns:
(terse) [enabled | disabled]
(verbose) FcClass2 = [enabled | disabled]
Specifies whether the FibreBridge will support Fibre Channel Class 2 (“Multiplexed”) service.
The FibreBridge uses Class 3 service by default.
FcFairArb
Syntax: set FcFairArb [enabled | disabled]
get FcFairArb
Returns:
(terse) [enabled | disabled]
(verbose) FcFairArb = [enabled | disabled]
The FcFairArb command is used to turn on or off FC-AL arbitration fairness. The default setting is
on, enabling arbitration fairness.
FcFrameLength
Syntax: set FcFrameLength [512 | 1024 | 2048]
get FcFrameLength
Returns:
(terse) [512 | 1024 | 2048]
(verbose) FcFrameLength = [512 | 1024 | 2048]
Specifies the maximum number of payload bytes in a Fibre Channel frame. If the frame length is
not specified, the current frame length is displayed. The default frame length is 2,048 bytes.
FcFullDuplex (ATTO FibreBridge 2200R/D and 3200R)
Syntax: set FcFullDuplex [enabled | disabled]
get FcFrameLength
Returns:
(terse) [enabled | disabled]
(verbose) FcFullDuplex = [enabled | disabled]