Specifications

22
SCSI configuration commands
ScsiPortTaggedQueuing
Specifies whether tagged command queuing is allowed on the SCSI port.
Limits: [enabled | disabled] Default: enabled
Action:
set ScsiTaggedQueuing [sb [enabled|disabled]]
Information:
get ScsiTaggedQueuing [sb]
SaveConfiguration
ScsiPortUltra2
Specifies whether the selected port supports Ultra2 (LVD) transfers
Limits: effective only if specified port is LVD SCSI bus
Action:
set ScsiPortUltra2 [sb [enabled|disabled ] ]
Information:
get ScsiPortUltra2 [sb ]
SaveConfiguration
ScsiPortWideTransfer
Specifies whether wide SCSI transfers should be negotiated.
Default: enabled
Action:
set ScsiPortWideTransfer [sb[enabled|disabled]]
Information:
get ScsiPortWideTransfer [sb]
SaveConfiguration
ScsiTargets
Returns a list of SCSI devices operational on the referenced SCSI port.
Action:
none
Information:
ScsiTargets [sb]
Returns: [line count]
[sb] [st] [sl] [device type] [vendor ID] [product ID] [revision] [serial
number]
ScsiTermination
Configures/reports the SCSI internal termination of the SCSI port identified.
Default: enabled
Action:
set ScsiTermination [sb [enabled | disabled ] ]
Information:
get ScsiTermination [sb]
SaveConfiguration