Specifications

11
You will be given confirmation once the connection is
made. (below)
Connect each tracking unit one at a time and repeat the above
process until all of your tracking units have been validated for use.
7. When all of the tracking units have been successfully validated
11
10
SOFTWARE SETTINGS
SOFTWARE SETTINGS
Click Close to return to the previous menu.
Important: Make a note of the Com Port # you use for this step.
This is the Com Port # that will be used to Set Base Configuration
on page 12.
5. From the Administrator program click Shadow Tracker™, click
Maintenance and then click Add Shadow Tracker™. (below left)
6. In the Tracker Maintenance window click Add. (above right)
Administrator will attempt to communicate with your unit and add
it to the database for future reference. When successfully
completed you will receive a confirmation message. (below)
they may be installed into their respective vehicles. Click Close to
exit Tracker Maintenance.
Important: Use the Premier Base System documentation you
received (below) to document which vehicle each tracking unit will
be installed into. It is also a good time to decide which
Driver/Employee will be assigned to which Vehicle. This will be
important in completing the remaining steps.
8. Disconnect the Download/Validation cable from the computer and
note which Com Port connection was used.
SET BASE CONFIGURATION
In a StandAlone system the Premier Base will be connected to the
StandAlone Computer. In a Client/Server system the Premier Base
will be connected to the Server Computer.
In order to establish communications with your Premier Base the