Specifications

ADDING THE TRACKING UNITS
Each tracking unit must be validated to the Shadow
Tracker™Professional software before you can begin collecting and
processing GPS and other data.
To add each unit:
1. Connect and power a Shadow Tracker™ Premier tracking unit to
your computer. (see Appendix 1)
2. Open the Administrator program.
Note: In a Client/Server system the Administrator program is
located on the Server Computer.
From the Windows Desktop click Start, point to Programs, point to
Click ATTI.
(above)
4. Click Shadow Tracker™ from the menu bar and then click
Set Communications Port.
a) If you know the Com Port # the tracking unit is connected to:
- If the Com Port # displayed is correct, click Close to return
to the previous menu.
- If the Com Port # displayed is not correct, click Edit and
select the correct Com Port # from the drop-down menu.
Click Save and then click Close to return to the previous
menu.
b) If you Do Not know the Com Port #:
- Click Detect. Administrator will attempt to locate the
correct port.
Note: Make sure there are no other devices connected to any
other Com Ports when using the Detect feature. Do not attempt
to detect a port without a tracking unit connected to it.
9
8
SOFTWARE SETTINGS
SOFTWARE SETTINGS
Shadow Tracker™ Professional, click Administrator.
3. Log into the program using the default username and password.