Specifications

SOFTWARE INSTALL TYPES

Shadow Tracker™Professional software can be installed as either a

non-networked Standalone or as a networked Client/Server

installation. The software can be installed on any computer which

meets the minimum system requirements.

STANDALONE

A Standalone install places all of the software on one computer.

If you intend to install Shadow Tracker™ Professional software as a

StandAlone system and intend to download wireless and non-wireless

tracking units, it is recommended that the computer you use have a

least (2) open 9-pin Com ports. One used exclusively for the

Premier Base and the second used to handle the non-wireless

downloads.

CLIENT/SERVER

A Client/Server install places the Mapping and Reporting software on

the Client Computer and the Administrative tools and Databases are

installed onto the Server Computer.

If you intend to install the software as a Client/Server system, the

computer on which you install the Server system will need at least (1)

open 9-pin Com port for the Premier Base. If you intend to

download non-wireless tracking units as well, this will be performed

using the Client system. The Client Computer will need (1) open 9-

pin Com port.

STEPS TO INSTALL THE CLIENT/SERVER SYSTEM

If you are performing a Client/Server system install it must be

performed in the following order:

1. Install the Server system on the Server Computer.

2. On the Server Computer, enable the Shadow

drive letter to the shared Shadow Tracker™Professional

program folder on the Server Computer from step 2. (below)

4. Install the Client system on the Client Computer.

Tracker™Professional program folder (STRT- default location:

C:\Program Files\STRT) as a shared network resource. (top right)

3. Before installing the Client system, on the Client Computer, map a