Datasheet

SERIES:
207A-ABA0-R
FILE:
207A-ABA0-R_spec
SPECIFICATION AND PERFORMANCE
DATE:
2013/01/16
MECHANICAL
Item Requirement Test Condition
Appearance No crack or
deformation that may
affect the
performance specified
in this specification.
EIA 364-18
Visual inspection
Durability No Damage EIA 364 – 09
Mate and unmate connector assemblies
for 10000 cycles at maximum rate of 200
cycles per hour.
Vibration No discontinuities of
1us or Longer
duration.
EIA 364-28, Condition I
Amplitude: 1.52mm
Frequency range: 10~55~10 Hz, shall be
traversed in approximately 1 minute
Duration: 2 hours in each of three
mutually perpendicular planes
(total of 6 hours).
Physical Shock No discontinuities of
1us or Longer
duration.
EIA 364 – 27 Condition H.
Subject mated connectors to 30 G’s
half-sine shock' pulses of 11 ms duration.
Three shocks in each direction applied
along three mutually perpendicular
planes ,18 total shocks ..
Mating Force 35N maximum EIA 364 – 13
Measure force necessary to mate
connector assemblies at maximum rate of
12.5 mm /min.
Unmating Force Initial: 10N minimum
Final: 8~20N
EIA 364 – 13
Measure force necessary to mate
connector assemblies at maximum rate of
12.5 mm/min.