Specifications
| 5
MODEL STUCTURE OF THE ATTACK BOILERS
THE NEW LINE OF THE ATTACK BOILERS FOE WOOD AND PELLETS
Model Line
3000
Model Line
5000
ATTACK FD
ATTACK DP
yy ATTACKyFDy25yAUTOMAT
yy ATTACKyFDy20–42yPELLE T
yy ATTACKyFDy20–42yBIOHEATy
y Output: 25 kW FD AUTOMAT
8–30 kW FD PELLET BURNER
6–25 kW FD BIOHEAT
y Efficiency: 90 % FD AUTOMAT
88 % FD PELLET BURNER
87 % FD BIOHEAT
AUTOMAT
PELLET, BIOHEAT
yy ATTACKyDPy25– 95ySTA NDARD
yy ATTACKyDPy25– 95yPROFI
yy ATTACKyDPy15–50yCOMBIyPellety
y Output: 15–45 kW
y Efficiency: 85,3–86,2 %
Model Line
6000
ATTACK DPX
yy ATTACKyDPXy15–45ySTANDARD
yy ATTACKyDPXy15–45yPROFI
yy ATTACKyDPXy15–45yLAM BDAyTouch
yy ATTACKyDPXy15–50yCOMBIyPellety
y Output: 15–45 kW
y Efficiency: 90,1–91,3 %
High efficient tubular exchanger „flue gas-water“ with
movable turbulators
Voluminous feeding chamber of the boiler ensures longer
heating by one fuel load
Exchanger is cleaned by turbulators moved by lever;
clean exchanger = high efficiency = lower operating
costs, fuel saving
Improved electronics with fluent PID regulation of fan
rotations according to the flue gas temperature – the
PROFI modification , version PID
Adjustable fan rotations – the PROFI modification,
version PID, LAMDA Touch
Flue gas fan for balanced and effective combustion and
dustless operation
Possibility to load big wood logs (from 25 kW output)
saves time for chopping the wood into smaller pieces, it is
only necessary to prepare the wood logs of 0,5 m
Automatic control of the heat-up flap, connected with the
feeding door
Option of the LAMBDA Touch version – the most advanced
technology of the burning process control to achieve the
excellent values of emissions and efficiency
Option to burn alternative fuel types like olive pits and
crushed pits in the automatic burners with the output of
30 and 50 kW – the COMBI Pellet modification
Refractory shaped pieces, heat resistant up to 1350 °C to
ensure the best burning parameters and boiler life
Flat rib boiler heat exchanger
Voluminous feeding chamber of the boiler to ensure long-
er burning by one load
Customer comfort, reliability of operation, easy use and
maintenance
Manufactured from special boiler steel of 6 mm thickness
to ensure long life of the boiler
Adjustable rotations of fan – the PROFI modification - PID
version
Exhaust fan for balanced, effective combustion and dust-
less operation
Possibility to load big wood logs saves time for chopping
the wood into smaller pieces, it is only necessary to pre-
pare the wood logs of 0,5 m
Left door and right door version
Option to burn alternative fuel types like olive pits and
crushed pits in the automatic burners with the output of
30 and 50 kW – the COMBI Pellet modification
Refractory shaped pieces, heat resistant up to 1 350 °C to
ensure the best burning parameters and boiler life
Fully automatic burner operation (ver. PELLET)
Compact design, easy control, information on LCD display
Boiler efficiency by nominal output of 88 % (ver. PELLET)
Automatic grate cleaning, adjustable according to the
quality of the pellets used (ver. PELLET)
Automatic start – ignition and termination of the burning
process
Precise measuring of the flame intensity by photocell
Possibility to set the output within the range of 8–30 kW
Burner operation controlled by the room thermostat or
thermal probe
Possibility to adjust combustion according to the fuel used
Quality stainless steel of the combustion chamber and
burner grate
Safety kits for protection against back burning,
4× protection against overheating – the emergency,
boiler, flue gas thermostat and after-cooling circuit
Multilingual menu, option to set wide range of parameters
Indication of the operating states
Error diagnostics