Specifications

20 |
EQUITHERMAL REGULATOR
The ATTACK REGUMAX equithermal regulator is the top
regulation unit for the ATTACK PELLET boilers.
The ATTACK REGUMAX regulator is intended for regulation
of heating systems, including D.H.W. preparation. It is used
for control of low-temperature and warm-water systems. Two
types of the room units (i.e. with and without display) can be
connected to this regulation unit.
The equithermal regulator ATTACK REGUMAX represents the
advantage of an easy installation with many ways of utilization.
THE ATTACK REGUMAX REGULATOR CAN CONTROL THE
FOLLOWING ELEMENTS OF THE HEATING SYSTEM:
y primary boiler circuit of the wood gasifying boiler
y recharging and discharging of accumulation storage devices
y solar system for D.H.W. preparation or additional warming of C.H.
y several heating circuits of different
temperature levels
y alternative source of heat
y D.H.W. preparation
y free programmable inputs
MODES OF OPERATION
Heating with and without time program, attenuation mode,
summer operation, manual mode, mode of automatic control.
CLOCK FUNCTION
Heating with own week time program, D.H.W. preparation
with time week program, 15 holiday periods.
EASY INSTALLATION
Easy and quick installation is ensured by connection termi-
nal, connection module or by connection module with spring
terminal for installation on the wall.
ATTACK HR, HRS
The accumulation tanks ATTACK HR, HRS are made from the qual-
ity steel and serve for accumulation of the heating water as well as for
preparation of the D.H.W. by an internal enameled exchanger. The AT-
TACK HRS model is accessorized with an extra exchanger to be con-
nected to the solar system. Tanks of this type have a built-in magnesium
anode in the D.H.W. tank to increase resistance against corrosion. The
electrical heating body can be installed by the HR type on the position
5 and 9 and by the HRS type on the position 5.
ATTACK HR: 10× socket G 1 1/2", 6× socket G 1/2", 2× socket G 1" – D.H.W.
ATTACK HRS: 10× socket G 1 1/2", 6× socket G 1/2", 2× socket G 1" –
solar circuit, 2× socket G 1" – D.H.W.
ATTACK TUV, TUVS
The accumulation tanks ATTACK TUV, TUVS are made from a quality
steel and they serve for accumulation of the heating water as well as for
the D.H.W. preparation in a water coil. The ATTACK TUVS model is ac-
cessorized with an extra exchanger for connection to the solar system.
ATTACK TUV: 8× socket G 1 1/2", 5× socket G 1/2", 2× socket G 1" – D.H.W.
ATTACK TUVS: 8× socket G 1 1/2", 5× socket G 1/2", 2× socket G 1" –
solar circuit, 2× socket G 1" – D.H.W.
ATTACK S, SS  STRATIFIED STORAGE TANKS
ATTACK S – is based on the ATTACK AK type. Disk and stratified
pipe installed in the exchanger enable creation of water layers ac-
cording to the temperature. This construction ensures different tem-
perature layers at the inlets and outlets.
ATTACK SS - is based on the
ATTACK AS and the ATTACK S types. It is accessorized with an extra
exchanger for connection to the solar circuit.
ATTACK S: 8× socket G 1 1/2", 5× socket G 1/2"
ATTACK SS: 8× socket G 1 1/2", 5× socket G 1/2", 2× socket G 1" –
solar circuit
ADVANTAGES OF INSTALLATION WITH
ACCUMULATION TANKS:
y equalisation of an inequal boiler output and higher comfort
y lower fuel consumption – boiler works at full output, i.e. with
optimal efficiency
y long life of the boiler and chimney – minimum production of tars
and acids at full ouput
y option to combine with another means of heating (accumulation
electricity, solar devices)
y option to combine radiators with underfloor heating
y higher comfort of operation
Technical data for all models of accumulation tanks can be
found on our website www.att ack.sk
ATTACK SLX, DPX, DP
MODEL LINE 7000, 6000, 5000