Specifications
10 |
THE WOOD GASIFYING
BOILER ATTACK DP
The wood gasifying boiler ATTACK DP in modifications
STANDARD, PROFI and COMBI Pellet is intended for eco-
nomical and ecological heating of the family houses, small
plants, work stations and similar objects.
Dry wood and pellets are the prescribed fuel for the ATTACK
DP boilers. By full utilization of the feeding chamber there is
possibility of the continual burning for 8–12 hours.
BOILER ADVANTAGES
y Modern and innovative design of the ecological boiler
y Flat rib heat exchanger
y Long time approved construction, thousands of the satisfied
customers
y High combustion efficiency – low fuel consumption – low emissions
y Boiler efficiency of 85,3–86,2 %
y Wide output range of 25–95kW
y 3 modifications – STANDARD, PROFI, COMBI Pellet
y Extraordinary voluminous feeding chamber of the boiler,
which ensures longer burning by one fuel load
y Burns soft and hard wood and wood pellets
y Possibility to load big wood logs - length of the feeding cham-
ber is 580 mm (by 25 kW and higher outputs) and enables to
load the wood logs of half-meter, which saves time by chop-
ping the wood
y Minimum of ash
y User comfort, reliability of operation, easy use and maintenance
y Manufactured from the special boiler steel of 6 mm to ensure
long life-time
y Suction fan for balanced and effective burning and dustless
operation
y Automatic boiler stop when fuel burns out
y Controlled rotations o f the fan – the PROFI version
y Left and right door version
y Possibility to burn alternative fuel types like olive pits and pit
crumb in the automatic burners with of 30 and 50 kW output –
the COMBI Pellet modification
y Refractory pieces are resistant up to the temperature of
1 350 °C, which ensure better parameters of burning
DIMENSIONS OF THE BOILER ATTACK DP 2545
DIMENSIONS OF THE BOILER ATTACK DP 75
DIMENSIONS OF THE BOILER ATTACK DP 95
DESCRIPTION OF THE BOILER ATTACK DP
KEY:
1. Boiler body
2. Front upper cover
3. Feeding door
4. Door of the combustion chamber
5. Control of the exhaust flap
6. Cleaning opening of the heat
exchanger
7. Aftercooling circuit
8. Flue gas exhaust
9. Flue gas fan
10. Outlet valve
11. Return connection
12. Flow connection
13. Primary air control
14. Secondary air control
15. Flap of the air inlet
16. Thermostatic regulator
17. Control electronics
18. Combined thermo-manometer
ATTACK DP
MODEL LINE 5000