Instruction manual

19
Menu Submenu Indication
Boiler set to
°C --
Shows adjusted temperature of water in boiler.
Boiler temperature
°C ---.-
Actual value. Shows actual temperature of water in boiler.
Flue gas set to
°C ---.-
Shows adjusted temperature of flue gas.
Flue gas temperature
°C ---.-
Shows actual temperature of flue gas.
O2 set to
% --.-
Shows adjusted O2 content in the flue gas.
O2
% --.-
Shows actual O2 content in the flue gas.
CO2 set to
% --.-
Shows adjusted CO2 content in the flue gas.
CO2
% --.-
Shows actual CO2 value.Tip: for calculation, max. 20,3%
of CO2 is used as fixed value.
Suction fan
ON/OFF
Operation state of the fan.
Circulating pump
ON/OFF
Operation state of the circulating fan.
Primary motor
% --.-
Position of the primary motor shield .
Secondary motor
% --.-
Position of the secondary motor shield.
Lambda
--.-
Ratio of air (actual value) Tip: for calculation, max. 20,3%
of CO2 is used as fixed value.
Efficiency
ETA – F (%) --.-
Grade of burning efficiency – actual value
For calculation, air temperature 35°C is used.
Complete temperature
excess
(%) --.-
Represents ratio of temperature excess (%) at complete
combustion time (summary of operation hours)
Temperature excess-
10 refuellings (%) --.-
Represents ratio of temperature excess after refuelling
In (%) at last 10 refuellings
Operation hours
h --.-
Represents operation hours of boiler. Po 60 000 hodinách
sa počítadlo vynuluje
Software
--.--
Programm version number
Information
Serial number
---------
Serial or production number of regulator
Test of device
Safety test
Setting
FINISH