User's Manual

User Manual
Document No.
UM-C-002-EN
Date of Revision
2020.08.30
Revision No.
0
QF-001
ATsens Co., Ltd.
95/123
10.6.8.5 Signal Plot – [Figure 10.137 Full Disclosure Tab screen - ④]
Signal Plot is an area that expresses the signal selected by the user in the Full Disclosure Tab. In this area, the
ECG can be checked in a full screen that is wider and longer than the time range of the existing signal, so it can be
useful when viewing the overall signal flow.
Figure 10.147 Signal Plot’
1) Display item: This area displays the type of signal and time information displayed in the Signal Display area,
and can be viewed including ECG / Motion / time information.
Figure 10.148 Description of Display item’
2) Signal Display
As shown in [Fig. 10.149 Description of Signal Display], the Signal Selection Box displays the selected
information and additional device temperature information. Device information is displayed as “Temperature:
xx.xx” in the Signal Display area, and a number indicating HR (heart rate) is displayed between graphs of each
signal. You can use the scroll bar to move up and down the Signal Display.
Figure 10.149 Description of Signal Display