User's Manual

User Manual
Document No.
UM-C-002-EN
Date of Revision
2020.08.30
Revision No.
0
QF-001
ATsens Co., Ltd.
93/123
The selected date has a red line below the date as shown in the picture above.
10.6.8.3 Strip item – [Figure10.137 Full Disclosure Tab screen - ②]
Figure 10.138 Selection option box in Full Disclosure Tab
1) Amplitude Selection Box: This is a drop box that controls the amplitude of Signal Plot of Full Disclosure.
Amplitude can be adjusted by selecting a value between “x0.5 ~ x2.0”.
Figure 10.139 Signal Plot at Amplitude x 0.5
Figure 10.140 Signal Plot at Amplitude x 2.0
2) Time Range Selection Box: This is a Drop Box that controls the Time Range of Signal Plot of Full Disclosure.
Time can be adjusted with a value between “x10sec ~ x180sec”
Figure 10.141 Signal Plot when Time Range is x 10sec
Figure 10.142 Signal Plot when Time Range is x 180sec
3) Time Control Box
Time Control Box is a function to designate the area the user wants to move in the Full Disclosure Tab and make
it move as it is.