User's Manual

User Manual
Document No.
UM-C-002-EN
Date of Revision
2020.08.30
Revision No.
0
QF-001
ATsens Co., Ltd.
85/123
3) Add Report/Remove Report function in Event Graph Plot
This function is a function that the user can add or delete to the report for each event in the Event Graph Plot.
Figure 10.119 Add Report/Remove Report function
In [Figure 10.119 Add Report / Remove Report Function], in “XX(YYY)” displayed under each event, the
preceding “XX” means the number of events added to the report, and “(YYY)” is the current Event Graph Plot. It
means the total number of each Event in.
■ Add all to the report – If you select this function, all events included in the Event Graph plot are added to the
report.
■ Remove all to report – If this function is selected, all events included in the Event Graph plot can be deleted
from the Report.
■ Remove except including report-If you select this function, all events except those included in the report are
deleted from the report.
10.6.5.5 Seconds Strip Plot – [Figure 10.113 Events Tab screen - ④]
Refer to [10.6.3.5 seconds Strip Plot]
10.6.6 AT-Note Tab
10.6.6.1 AT-Note Tab screen
Figure 10.120 AT-Note Tab screen
1) Date Tab – [Figure 10.120 AT-Note Tab screen - ①]