User's Manual

User Manual
Document No.
UM-C-002-EN
Date of Revision
2020.08.30
Revision No.
0
QF-001
ATsens Co., Ltd.
84/123
13
SVE Bigeminy
Determines whether an event label will be displayed when an SVE occurs every other beat.
14
SVE Trigeminy
Determines whether an event label will be displayed when an SVE occurs every third beat.
15
Bradycardia
Bradycardia is a slower than normal heart rate. The hearts of adults at rest usually beat
between 60 and 100 times a minute.
16
Tachycardia
Tachycardia, also called tachyarrhythmia, is a heart rate that exceeds the normal resting rate.
In general, a resting heart rate over 100 beats per minute is accepted as tachycardia in adults.
17
R-R Pause
Sets the maximum duration, in milliseconds (msec), between two R waves that will be
considered normal. Any duration above that limit will be labeled a significant R-R Pause
18
N-N Delay
Sets the maximum percentage of the average duration between two normal beats. Any
duration above that percentage will be labeled an N-N Delay.
19
N-N Pause
Sets the maximum duration, in milliseconds (msec), between two normal beats that will be
considered normal. Any duration above that limit will be labeled a significant N-N Pause.
20
Atrial Fibrillation
Commonly called A-fib or AF, this irregular heartbeat causes the atria to quiver and prevents
them from effectively moving blood into the ventricles. It can lead to stroke or other heart-
related complications.
21
Note
This is the record that the user who attached the AT-patch directly saved to the AT-patch
when symptoms occurred. When symptoms are manifested, pressing the power key of AT-
patch is saved as a symptom event, and the saved data can be loaded as AT-report through
AT-patch and AT-note App.
22
Noise
Noise caused by various causes such as noise due to muscle movement, noise due to
movement, noise due to breathing, noise due to AT-patch contact, etc.
23
User Appended
Indicates the event area designated by the user using AT-report in the xx Second Strip Plot.
Refer to [xx Second Strip Plot] → [Send Report Box ].
2) Move function in Event Graph Plot
Event Graph Plot shows all events included in the date selected in the Date Tab.
Figure 10.118 Events Graph Plot
Click the pentagonal area to move right/left in the current event