User's Manual

User Manual
Document No.
UM-C-002-EN
Date of Revision
2020.08.30
Revision No.
0
QF-001
ATsens Co., Ltd.
79/123
Figure 10.105 Selection Sub class QRS label Card
[Figure 10.105 Selection Sub-class QRS Label Card] shows how to select Sub-class QRS Label Card. If you
select the Sub-class QRS Label Card with the left mouse button, the selected Sub-Class QRS Label Card is
changed to gray.
Figure 10.106 When Sub-class QRS Label is changed, Index change (Bold font) is displayed
10.6.4.2 Multi Selection Sub-class QRS Label Card
1) 1
st
selection guide
As you can see in [Figure 10.107 Multi-Selection Sub-class QRS Label Card-1st], you can select multiple sub-
class QRS Label Cards by clicking & dragging the lower left or upper right using the left mouse button.
Figure 10.107 Multi-Selection Sub-class QRS Label Card-1st
2) 2
nd
selection guide
As in [Figure 10.108 Multi-Selection Sub-class Event Card - 2nd], you can select only the Sub-class Event Card
you want to select (①→②→③→④) by using the ctrl( ) key on the keyboard and the left mouse button
together. In the selected state, click the selected sub-class event card in the same way as above to cancel the
selected state.