User's Manual

User Manual
Document No.
UM-C-002-EN
Date of Revision
2020.08.30
Revision No.
0
QF-001
ATsens Co., Ltd.
67/123
3) HR Plot: HR Plot shows the HR Plot for the entire date selected in the Regions Tab. In the HR Plot,
information on the Maximum HR Plot / Average HR Plot / Minimum HR can be obtained, and if the user wants to
check the noise event of the QRS Label Rate, the noise event can also be obtained.
Figure 10.73 HR Plot in Regions Tab
Figure 10.74 How to display Noise Event in HR Plot in Regions Tab
10.6.2.4 Strip Plot [Figure 10.69 Regions tab screen ③]
Figure 10.75 Strips Plot
1) Time Range: It shows the initial start time of ECG displayed in Strips Plot.
2) Time Selection button: This is a button to select the time range of the ECG displayed on the Strips Plot. In the
case of 15sec, the ECG displayed on the Strips Plot appears in a time range of 15sec, and in the case of 20sec, the
ECG displayed in the Strips Plot appears in the range of 20sec.
3) Time range box: Time Range Box displayed in Strips Plot is linked with Time Range Selection value of
Seconds Strip Plot. That is, if the value of Time Range Selection of Seconds Strip Plot is 10sec, the Time Range
Box is displayed as 10sec, and if it is 20sec, it is displayed as a box within the range of 20sec.