User's Manual

User Manual
Document No.
UM-C-002-EN
Date of Revision
2020.08.30
Revision No.
0
QF-001
ATsens Co., Ltd.
61/123
8) Export back-up-This is a function to export patient data from the Back-up List to an external storage device.
After selecting the data to be exported from the patient data in the back-up list, click the export back-up button
( ) to execute the export.
Figure 10.61 Export Back-up
9) Recording List – The Recording List button is to go back to the screen with the Recording List from the current
Back-up List screen.
10.6.1.4 Recording List [Figure 10.50 Recording Tab screen ③]
When the user selects the contents of the List in the Recording List, it is displayed in red as in [Fig. 10.62
Recording List].
Figure 10.62 Recording List
1) Patient Information : This is the data created based on the patient information entered in Start → New Patient
Data. In the Recoding List, information of Last Name / First Name / Date of birth / Patient ID is displayed.
2) Recording Date : It is the date when patient data was imported and recorded.
3) Status : Displays the status of imported patient data. Imported patient data is expressed in three states:
“Downloaded”, “Modified” and “Report”. “Downloaded” is the status of the imported initial data without the user
modifying the data, and “Modified” is the status of the data modified by the user as shown in [Figure 10.62
Recording List]. “Report” is the status of data displayed when a user creates a report.
4) AT-note : Start → If the download of “AT-note Data” is completed in Patient Data, it is expressed as
“Downloaded”, and if “AT-note Data” is not downloaded, it is expressed as “Empty”.
5) Recording List Edit function
- Resize column width to contents
: This function arranges the contents of the initial Recording List according to each width. If you place the mouse
arrow on the column of the Recording List and click the right button, a pop-up box appears as shown in [Figure