User's Manual

User Manual
Document No.
UM-C-002-EN
Date of Revision
2020.08.30
Revision No.
0
QF-001
ATsens Co., Ltd.
48/123
Figure 10.29 Hookup location
2) Error message according to user action in hook-up
Error message
Detail
Hookup connection error
not found serial port.
please check BLE dongle connection.
Error message according to user action in hook-up
Hookup connection error
can not open serial port.
please eject BLE dongle and re-insert
When a problem occurs in setting the BLE dongle
during hookup, you must remove the BLE dongle and
insert it again.
Hookup connection error
connecting AT-Patch is fail.
please retry after a few seconds.
When an unknown problem occurs in the BLE
connection during hookup, you must try again after a
certain period of time.
Hookup connection error
not found AT-Patch to PSN.
please check the PSN of AT-Patch again.
When the SN of AT-Patch and the SN information
entered do not match during hookup
Hookup connection error
disconnected from AT-Patch.
please turn on AT-Patch again.
When the ECG signal is being received during
hookup, but the reception of the ECG signal is cut off
due to AT-Patch Power-off or other reasons.
10.5.3 Setup [Fig 10.21 Title Bar Menu ②]
10.5.3.1 Setup screen description
Item
Main function
Detail
About
Check information
SW, version, manufacturer, contact etc.
License
License setting
License check, ID copy etc.
Storage
Save setting
Storage location, type, capacity, etc.