User's Manual

User Manual
Document No.
UM-C-002-EN
Date of Revision
2020.08.30
Revision No.
0
QF-001
ATsens Co., Ltd.
47/123
please reconnect the patch and retry again.
USB download error
The connection is disconnected during the
download.
please reconnect the patch and retry again.
When the AT-Patch and the dedicated cable are disconnected
during USB download
ECG Import error
When ECG Data Import cannot be performed for an
unknown reason (reconnect AT-Patch, turn on the power and
try again.)
10.5.2.4 Hookup function
1) The Hook-up function of the Patient data screen is a screen to check whether the ECG signal is normally
recorded from the device attached to the patient's body, and the PSN of the attached device must be registered in
Patient data.
Figure 10.28 Hookup location
2) On the Hook-up screen, the current ECG signal can be viewed in real time by connecting AT-Patch
corresponding to the input SN with BLE. At this time, if AT-Patch is already connected to App via BLE, PC and
BLE are not connected. Depending on the strength or weakness of the signal, you can take measures such as
removing the attached device and attaching a new device in the correct position.