User's Manual

User Manual
Document No.
UM-C-002-EN
Date of Revision
2020.08.30
Revision No.
0
QF-001
ATsens Co., Ltd.
45/123
Figure 10.26 Patient Data Import Screen
1) You can change existing registered patient information in the Patient Data Box of the Patient List.
[Fig 10.26 - -①]
2) AT-Patch Data and AT-Note Data can be imported (imported) from the Patient List.
[Fig 10.26 - -②]
3) There are two ways to import AT-Patch: After turning on the power of AT-Patch, connecting it to a computer
through a dedicated cable to load the data stored in the AT-patch and the data stored in the PC. Use the [File]
button to load the ECG data stored in the PC, and the [USB] button to load the data stored in the AT-patch.
4) AT-Note Import is a function to import ECG data stored in Smartphone using USB Cable or Bluetooth in App
5) If the import takes a long time depending on the amount of data, it is also progressed in the background, so you
can close the import screen without waiting or move to another screen by pressing the'Patient List' or'New Patient
data' button.
6) Even if the start screen is closed, the data being imported operates as a background and the import operation
continues. When the import of both AT-Patch and AT-Note data is completed, a balloon-type dialog box in [Start]
of the Title Bar as shown in [Figure 10.27 AT-patch import process] indicates the completion of the import. When
both ECG and Note data are imported, they disappear from the patient list and can be checked in the Recording
Tab