User's Manual

User Manual
Document No.
UM-C-002-EN
Date of Revision
2020.08.30
Revision No.
0
QF-001
ATsens Co., Ltd.
33/123
10. How to Use S/W (ATR-C130 AT-Report PC S/W)
10.1 Overview of AT-Report S/W
1) AT-Report S/W (ATR-C130) is obtained from ATP-C130 device. The S/W is a program that can read ECG data
file of device user saved by ATN-C130 (Android / IOS) App on PC of Microsoft○
c
Windows based OS, show
ECG rhythm waveform and analyze ECG Data.
2) AT-Report S/W performs the following functions:
① Opening ECG data file of own format saved by ATN-C130 App and reading data.
② Showing the read ECG Data in visual graph.
③ Analyzing each ECG data through its own analysis algorithm.
④ Searching the specific time and seeing the ECG data in the graph.
Figure 10.1 ECG Data Flowchart
3) AT-Report S/W does not change or remove the state of ECG Data file and does not change any attributes of the
file.
4) AT-Report S/W stores abnormality determination result information or other data for the analyzed QRS signal
type as a separate file. The imported ECG data value is not changed, and the QRS signal analyzed according to
the algorithm is saved after the location or type is changed or newly added according to the user's command.
10.2 Installation of AT Report PC S/W (ATR-C130)
1) After connecting the provided USB memory stick to the PC, execute the ATR-C130 (AT-Report S/W)
installation file saved as shown in [Figure 10.2]. (However, the file name can be changed.)