User's Manual

User Manual
Document No.
UM-C-002-EN
Date of Revision
2020.08.30
Revision No.
0
QF-001
ATsens Co., Ltd.
113/123
Figure 11.2. How to attach ATP-C130
2) How to Attach to the Human Body
After pressing the power button of the device to operate normally, remove the tape to protect the patch as shown
in ① of [Figure 11.2]. After attaching the tape removed device to the human body [Figure 11.2] ② As shown in
the figure, attach the center part of the clavicle to the body in an inclined direction toward the nipple of the left
chest. However, if the chest is large or it is difficult to attach it in an oblique direction, the part facing the nipple
must be slightly raised to attach it.
[Figure11.2] ③ Start ECG measurement as shown in the figure. When the device is attached to the human body,
press the entire patch so that there is no gap.
.