User's Manual

User Manual
Document No.
UM-C-002-EN
Date of Revision
2020.08.30
Revision No.
0
QF-001
ATsens Co., Ltd.
104/123
In order to change the sub-class QRS label card with the indicator line in the center as ② of [Fig. 10.167 Sub-
class QRS Label Card Change Method], [10.7.2.3] of [10.7.2 Seconds Strip Plot Modification]. ① Change QRS
Label] function can be referred.
After that, when the sub-class QRS Label is changed, it automatically moves to the next Index (Index 1 → Index
2 → Index 3). This operation can be done continuously and repeatedly, and finally, when the user modifies the
last sub-class QRS label (modify the QRS label using the keyboard or the right mouse button), press the Enter key
on the keyboard to the next sub-class tab. You can move to.
Figure 10.168 Creation Index of Sub-class Tab in Group Class QRS Label Card
Figure 10.169 Additional generation method of newly created sub-class tab
10.7.7 Time Sync function of Indicator Line
When the user selects a specific area (Plot / Class or Sub-class Card / List Data) that the indicator line used in the
AT-report is the indicator line in the plots used in each tab, Time information is also arranged in the center.
In Average HR Plot of [Figure 10.170 Time Sync Function of Indicator Line], if you click the left mouse button as
in ① to create an Indicator Line, the Indicator Lin is located in the center of the entire Time Range of the Strips
Plot and Seconds Strip Plot.