User's Manual

User Manual
Document No.
UM-C-002-EN
Date of Revision
2020.08.30
Revision No.
0
QF-001
ATsens Co., Ltd.
101/123
the right mouse button. You can add a QRS Label to an arbitrary area by selecting QRS Label from the pop-up
menu that appears with a right-click.
Figure 10.159 Add QRS Label function
4) Move Indicator Line
If QRS Label is selected at the selected time, the position can be adjusted using the + mouse wheel.
5) The QRS Label icon is changed for the changed QRS Label.
Figure 10.160 Changed QRS Label
6) If the selected time is in the event section, the name of the event is displayed, and you can enter a comment or
decide whether to add it to the report. To add an event to the report, select ( ) the check box of □Included in
report.
Figure 10.161 Comment input of event/Whether to add a report
7) Add Event symptom in Seconds Strip Plot
As shown in [Figure 10.162 Add Event Symptom], to add an event symptom in the ECG graph of the Seconds
Strip Plot, the user can use Click & Drag of the left mouse button. After designating the time range of a certain
area by using the left mouse button, and clicking the right mouse button, a box for selecting an event symptom
appears. Event symptom is added by selecting the desired Event from the box.